The EP Greenhouse gearbox is a concise and lightweight reduction gear driver with an integrated limit switch system that’s ideal for assembly of a locally available electric electric motor. The reducer can be used in manually-managed or climate-controlled ventilation and display systems in greenhouses. The quick and easy-to-install EP gear reducer is rainproof and windproof. The gear motor has a high protection course (IP65) and can be utilized within an ambient temperature of 0-60 °C.

The low-noise gear reducer for Greenhouse has a gearwheel transmission and a worm wheel transmission, which are integrated in an aluminum precision housing. The self-braking worm wheel transmission means that the drive shaft is definitely locked when the decrease geared motor isn’t running. The completely sealed reduction gear driver comes with an growth chamber with a diaphragm to keep carefully the gear oil at a low pressure under all situations, even at high temperature ranges. Thanks to the usage of an growth chamber, the geared motor could be installed in any position. There are no limitations, because there is no dependence on a bleed connect. The sealed reduction gear reducer keeps the apparatus essential oil of the geared motor in optimum condition because of its entire operating lifetime. The geared motor is suitable for discontinuous use, working course s3-30%, with a maximum activation time of 25 minutes.

The Gear box reduction geared motor has an FT85 motor assembly flange, to which the right IEC standard motor can easily be installed (EN 50347).

The Gear box has a rotating limit switch system with operating switches and circuit breakers (NC contacts) for turning off by the end positions. The limit change system is installed in an built-in chamber and is usually enclosed by an impact-resistant plastic-type material cover. The limit change system is obtainable and simple to adjust. The limit change system’s optimum switching range can be 40 or 64 revolutions of the drive shaft. The cabling is linked in spring-clip connections. The geared motor comes with an IP68 M16 x 1.5 cable gland (5-9 mm cable) for the cable feed-through.

The gear reducer for greenhouse includes 16 teeth 5/8”x3/8” sprockets, keys and fasteners. The accompanying chain couplings and assembly plates can be found as accessories.

Optimum drive torque of 150 Nm or 450 Nm.
Rotational speeds of 3 or 5 rpm for a mains frequency of 50 Hz or 3.6 or 6 rpm for a mains frequency of 60 Hz in the event of application of 4-pole electric motor.
Protection class IP65.
May be used in ambient temperatures of 0-60°C.
Suitable for discontinuous use, operating class s3-30%, optimum activation time 25 mins.
Equipped as standard with 16-tooth galvanised chain coupling 5/8″x3/8″.
FT85 motor assembly flange for installing IEC regular motor (EN 50347).
Maximum switching selection of limit switch system 40 or 64 revolutions of the drive shaft.
IP68 M16x1.5 cable gland for cable feedthrough (5-9 mm cable).